RM40 "One of the best speakers in the world has just gotten better. This is a Component of Exceptional Merit."

RM30 "A speaker that can match the dynamic capabilities of competent horns, the immediacy of electrostatics and planar-magnetics, and the fine detailing and imaging of the best dynamic designs."

RM2 "Stunning dynamics and incredible bass response alone are enough to make me want them. They are at or near the top of this group in virtually every category of music and sound reproduction, and haven't a single glaring weak point."

QSO 626R "I’ve owned more expensive speakers than the VMPS Signature Edition 626R monitors, but nothing has bettered them. They are now my reference for top-quality sound in a monitor design."

Subwoofers "Beautiful tight articulate bass with no noticeable distortion. Will play at 115 dB or more at the 20Hz range without breaking a sweat."

Home Theatre "About the LRC bass being powerful and extended, I was more than pleasantly surprised - shocked is more like it. How you do that?"

Small size and wide range of Neo ribbon midrange made it possible to build a smaller three way speaker than our acclaimed big SuperTower or FF models. Ribbon Monitors 2 and 1 were born. Next development, RM40 became the 2002 CES winner in high-end audio category only a few months after its introduction.

Every VMPS loudspeaker has controls for level adjustment of every driver (or group of drivers), other than bass. Every floorstander features tuneable slot-loaded passive radiator. Soundcoated cabinets are standard from RM2 upwards.

RM/X "Elixir", among many innovations, was the first VMPS to use new FST tweeter, which is now available in all models. Latest addition in RM range is RM30, which in some instances can be considered as a compact version of RM/X. RM30 introduced new 16cm WCF Megawoofers, now optional on 626R.

In 2007, RM family is further extended with unique RM V60 loudspeaker. RM V60 + VLA subwoofers represents our current top of the line system.

Previous top of the line Super Tower III/SRE uses Raven R2 ribbon tweeter and Neo midrange drivers, nine per side.

There are five subwoofers. Biggest is the Very Large Array, following are Very Solid Sub and Larger Subwoofer, then 215 and Dedicated Subwoofer. Passive crossovers in subwoofers are optional. All subwoofer's cabinets can be improved with Soundcoat. Every subwoofer features tuneable slot-loaded passive radiator.

VMPS Neo ribbon loudspeakers based home-theater setup can be completed with a Large Ribbon Center or RM30 C as center speakers, and Dipole Surround as rear or effect speakers.

You can upgrade most VMPS models with deluxe components and high quality finishes. 

Crossovers in all our systems are executed at the high quality level, with Teflon silverplate 
wiring, Erse “Super Q” coils, and Axon and custom polypropylene capacitors. We can think of only one way to improve on these parts: superpremium capacitors from Audience (Auricap) and TRT, parts too expensive for use in many of the costliest high end competitors including, unbelievably, those retailing in the six figure range.

1. The Auricap upgrade gives you some of the most highly reviewed crossover capacitors available, providing a significant and audible improvement in the quality of the signal throughpath. There is a lot of literature available on the Audience website, including magazine and webzine articles. Suffice to say this is a highly recommended option for any of our ribbon speakers.

2. Some music lovers are not content with less than the very best, however, regardless of cost. To those demanding few we now offer the TRT Dynamicaps, “naked” (unwrapped) handmade caps which the factory hand-peeled to the exact value required for each of our models. While the Auricaps are very good, we feel the TRT’s go to another level. The TRT’s are not cheap, but they are very worthwhile.

3. New 16cm WCF Megawoofer for QSO 626R. This option is included with MLS cabinet option for 626. First appeared at RM30, brings overall better performance than regular 16cm WCF.

4. Completely new cabinets, called MLS are available for RM40, RM30, 626R and LRC. Gorgeous finishes, and even better construction with more mass and internal braces. Choice of genuine wood veneers include rosewood, african ebony, maple, walnut and piano black.

5. Constant Directivity WaveGuide upgrade for all loudspeakers. CDWG gives even off axis response for all VMPS loudspeakers which reflects as huge improvement in sound. From the outside CDWG looks exactly the same as regular grilles. As an upgrade, it is also required to upgrade existing passive radiator for those suited for operation with CDWG. Currently only available for RM40, for other models expected app. end of Jan. 2006. Click here for more on this unique VMPS technology.

6. Bolder silver wire from crossover point to bass driver on any loudspeaker or subwoofer. More clarity for bass range.

7. Soundcoat for 626R and subwoofers. Standard on RM2 and larger models. Soundcoat eliminates cabinet resonances for approximately 10 dB above 200Hz.

8. "SR-71" cabinet insulation upgrade (BlackHole 5 self-adhesive plates) for all loudspeakers and subwoofers. Even more effective reduction of cabinet resonances than Soundcoat.

9. Baskets of bass drivers and passive radiators at QSO 626R, RM2 and Subwoofers can be damped with Dynamat Extreme self-adhesive plates.

10. OXO and Supermax. OXO is outboard crossover placed in separate cabinet. Supermax version include all wiring in Bolder Silver wire.